INSTRON 68TM-100

INSTRON 68TM-100

The 68TM-100 is a dual-column table-top model of the 6800 Series for tensile, compression and flexure tests up to 100 kN. It provides high frame stiffness and precise alignment and is available in standard and extra-height (on some models also extra-width) versions. The 100 kN model is the highest-capacity table-top frame Instron has offered: it is 40 % smaller than a standard 100 kN floor model, runs from a standard power outlet and is compatible with nearly all accessories up to 100 kN.

Key features

- Auto Positioning for an identical starting position in every test
- Specimen Protect: prevents excessive force on the specimen during setup
- Data acquisition up to 5000 Hz, accuracy ±0.5 % of reading down to 1/1000 of load cell capacity
- Compatible with AVE 3, the torsion add-on and automation
- Bluehill Universal software

Technical data

Force capacity

100 kN

Design

Dual-column table model

Crosshead travel (standard / extra height)

1097 / 1582 mm

Vertical test space (standard / extra height)

1168 / 1672 mm

Horizontal test space

420 mm

Speed (minimum – maximum)

0.001 – 508 mm/min

Maximum return speed

508 mm/min

Position control resolution

2.69 nm

Frame axial stiffness

180 kN/mm

Maximum force at full speed

50 kN

Maximum speed at full force

254 mm/min

Weight (standard / extra height)

266 / 295 kg

Maximum power requirement

1200 VA

Footprint (h × w × d)

1640 / 2170 × 760 × 715 mm

Data acquisition

up to 5000 Hz

Load measurement accuracy

±0.5 % of reading down to 1/1000 of load cell capacity